Official Test
	Nebraska Test Number			TBD-Nebraska Test
Engine
	Manufacturer			John Deere 4.5L PowerTech E (2 valve)
	Aspiration			Turbocharged & Intercooled
	Cylinders/Displacement, cu. in. (liters)			4/276 (4.5)
	Cylinder Liners			Wet
	Fuel Tank Cap., US Gal. (L) (Open; Cab)			---
		Standard		41.7 (158)
		Optional		N/A
	Underhood muffler			Yes
Performance
	Advertised PTO HP (kW) @ Rated RPM			115 (85.8) @ 2100 per SAE
	Official PTO HP (kW) @ Rated RPM			TBD-Nebraska Test
		@ Standard PTO @ Eng RPM		TBD-Nebraska Test
		Maximum @ Eng RPM		TBD-Nebraska Test
	Advertised Engine HP (kW) @ Rated Speed			137.8 (101.3) @ 2100 per ISO 97/68/EC
	Max Unballast Drwbr HP (kW) @ Eng RPM			TBD-Nebraska Test
	Maximum Torque (PTO) @ RPM, lb-ft (Nm)			TBD-Nebraska Test
	Max Torque Rise (80% Rtd Spd) @ Eng RPM			TBD-Nebraska Test
	Maximum Torque Rise % (PTO) @ Eng RPM			TBD-Nebraska Test
Fuel Use, U.S. gal./hr. & HP hr./gal. at:
	PTO @ Rated Eng RPM			TBD-Nebraska Test
	Standard PTO Speed @ Eng Speed			TBD-Nebraska Test
	Maximum PTO Power @ Eng RPM			TBD-Nebraska Test
	Maximum Engine Power @ Eng RPM			TBD-Nebraska Test
	Max Unballasted Drawbar Power @ Eng RPM			TBD-Nebraska Test
	75% Load, Full Engine RPM (Unballasted)			TBD-Nebraska Test
	75% Load @ Reduced RPM (Unballasted)			TBD-Nebraska Test
Transmission
	Std. Transmission; Forward/Reverse			9F/9R PowrReverser
	Opt. Transmission; Forward/Reverse			N/A
	Reverser			Base LH
	On-the-Go Shifting (Yes/No/Partial)			Yes
	Clutch; Wet/Dry			Wet
	Creeper			No
Power Take-Off (PTO)
	Standard			Independent 540/1000
	Optional			N/A
	PTO Speeds @ Engine RPM			TBD-Nebraska Test
	PTO Actuation			TBD-Nebraska Test
Hydraulics
	Type			Open-Center
	Pump Rated Output, GPM (L/min.)			TBD-Nebraska Test
		Standard		17.6 (66.6)
		Optional		N/A
	Rated Flow @ One SCV, GPM (L/min.)			N/A
	Max Output @ SCV Couplers, GPM (L/min.)			N/A
	Maximum Operating Pressure, PSI (kPa)			2830 (19500)
	Maximum Hydraulic Power, HP (kW)			18.6 (13.8)
	Hitch Draft Control Load Sense Type			Lower-link
	Remote Control Valves Available			2 std., 3 opt.
	Hitch Category (SAE Designation)			Category II
	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.			---
		OECD		---
		Standard		6930 (3150)
		Optional		---
	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)			---
		Standard		---
		Optional		---
	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)			---
		Standard		---
		Optional		---
	Sensing Type			Mechanical
	Joystick SCV Control			Mid mount, opt.
Final Drive
	Type			Inboard Planetary
	Differential Controls			Mechanical
	Availability			---
		Front		N/A
		Front & Rear		N/A
	Engage On-the-Go Rear Differential Lock			Yes
	Axle Type			Flanged
	Brakes, Type and Control			Mechanically actuated wet disk
Operator Station
	Rollover Protective Structure, OOS			N/A
		Rigid - Foldable - Telescopic		N/A
		Platform - Flat/Straddle		N/A
		Gearshift Location - Console/Floor		N/A
	Cab			---
		Doors		2
		Platform - Flat/Straddle		Flat
		dB(A) Rating		82
		Seat Suspension System		Mechanical, Air opt.
2WD Dimensions
	Wheelbase, in. (mm)			N/A
	Front Tread Range, in. (mm)			N/A
	Rear Tread Range, in. (mm)			N/A
	Minimum Rear Tread Setting, in. (mm)			N/A
	Front Axle Clearance, in. (mm)			N/A
	Turning Radius w/Brakes, ft. (m)			N/A
	Turning Radius w/o Brakes, ft. (m)			N/A
	Unballasted Operating Weight, lb. (kg)			N/A
	Approx. Ship Wgt, lb. (kg) Open; Cab			N/A
MFWD Dimensions
	Wheelbase, in. (mm)			92.5 (2350)
	Front Tread Range, in. (mm)			59.7-79.4 (1516-2016)
	Front Axle Clearance, in. (mm)			18 (457)
	Turning Radius w/Brakes, ft. (m)			N/A
	Turning Radius w/o Brakes, ft. (m)			14.7 (4.5) @ 67.7 in. tread setting
	Limited Slip Differential			Yes
	Unballasted Operating Weight, lb. (kg)			9390 (4260)
	Approx. Ship Wgt, lb. (kg) Open; Cab			9390 (4260)
4WD Dimensions
	Wheelbase, in. (mm)			N/A
	Wheel Tread, Min. to Max. in. (mm)			N/A
	Turning Radius w/o Brakes, ft. (m)			N/A
	Nebraska Test Unballasted w/Duals, lb.(kg)			N/A
	Unballasted Weight, lb. (kg)			N/A
Standard Tires
	2WD			---
		Front		N/A
		Rear		N/A
	MFWD			---
		Front		13.6-24 in., 6 PR R1
		Rear		18.4-34 in., 8 PR R1
	4WD			N/A
	Track Widths			N/A
Miscellaneous
	Country of Manufacture			Saltillo, Mexico
	Ballasting Restrictions, lb. (kg)			Refer to Operator's Manual
	*Notes			Updated - 03/17/2009