| DATE OF SPECIFICATION | Mar-08 | |||
| ENGINE | ||||
| Manufacturer | John Deere | |||
| Model | 5030Tw | |||
| Gross Horsepower (kw) | 82 (61) | |||
| Net Horsepower (kw) | 76 (57) | |||
| Rated RPM | 2800 | |||
| Grosspeak Torque, lb-ft (nm) | 202 (274) | |||
| #Cylinders | 5 | |||
| Displacement, cuin(L) | 186 (3.1) | |||
| Engine aspiration | Turbocharged | |||
| Fuel Capacity, gal (L) | 24 (91) | |||
| HYDRAULIC SYSTEM | ||||
| Standard Pump Flow, gpm (L/min.) | 22 (83) | |||
| Optional High Flow, gpm (L/min.) | 36 (136) | |||
| System Pressure, PSI (KPA) | 3100 (21360) | |||
| Auxiliary Hydraulic Circuit, Std; Opt | Std | |||
| Hydraulic power, calculated, hp (kw) | 39.8 (29.6) | |||
| Opt High-Flw Hyd pwr,calculated,hp(kw) | 65.1 (48.8) | |||
| PERFORMANCE | ||||
| SAE Rated Oper Cap (ROC), lb (kg) | 2,750 (1247) | |||
| SAE ROC with opt Counterweight, lb (kg) | 3,100 (1406) | |||
| Tipping Load, standard, lb (kg) | 5,500 (2495) | |||
| Boom, lb(kn) | 4,800 (21.3) | |||
| Bucket, lb(kn) | 10,500 (46.5) | |||
| Heaped Bucket Capacity, cu ft (cum) | 17.66 (0.50) | |||
| Reference Bucket Width, in (mm) | 78" (1980) | |||
| Self leveling bucket, Opt | Opt | |||
| DRIVE TRAIN | ||||
| Maximum Grnd Speed,stand,mph (kph) | 7 (11.3) | |||
| Two Speed Trans Grnd Speed,mph(kph) | 12 (19.2) | |||
| Drive chain size | 100 Hz | |||
| Axle torque, lb-ft (nm) | 6,235 (8454) | |||
| Standard Tire Size | 14x17.5 | |||
| DIMENSIONS | ||||
| Length with Bucket, in (mm) | 139" (3530) | |||
| Length Without Bucket,in (mm) | 116" (2950) | |||
| Width Without Bucket, in (mm) | 76" (1930) | |||
| Height to ROPS, in (mm) | 83" (2110) | |||
| Height to Hinge Pin, in (mm) | 127" (127) | |||
| Dump Height, in (mm) | 102" (2590) | |||
| Dump Reach, in (mm) | 32" (810) | |||
| Dump Angle, degrees | 45º | |||
| Bucket Rollback @ ground, degrees | 35º | |||
| Wheelbase, in (mm) | 48" (1220) | |||
| Ground Clearance, in (mm) | 11" (279) | |||
| Angle of Departure, degrees | 27º | |||
| OPERATING WEIGHT, STANDARD LB (kg) | 8,580 (3892) | |||
| Specifications are based on published information at the time of publication. Specifications are subject to change without notice. | ||||