| DATE OF SPECIFICATION | Mar-08 | |||
| ENGINE | ||||
| Manufacturer | John Deere | |||
| Model | 4024T | |||
| Gross Horsepower (kw) | 66 (49) | |||
| Net Horsepower (kw) | 62 (46) | |||
| Rated RPM | 2800 | |||
| Grosspeak Torque, lb-ft (nm) | 156 (212) | |||
| #Cylinders | 4 | |||
| Displacement, cuin(L) | 149 (2.4) | |||
| Engine aspiration | Turbocharged | |||
| Fuel Capacity, gal (L) | 16 (61) | |||
| HYDRAULIC SYSTEM | ||||
| Standard Pump Flow, gpm (L/min.) | 19 (72) | |||
| Optional High Flow, gpm (L/min.) | 31 (117) | |||
| System Pressure, PSI (KPA) | 3450 (23770) | |||
| Auxiliary Hydraulic Circuit, Std; Opt | Std | |||
| Hydraulic power, calculated, hp (kw) | 38.2 (28.5) | |||
| Opt High-Flw Hyd pwr,calculated,hp(kw) | 62.4 (46.8) | |||
| PERFORMANCE | ||||
| SAE Rated Oper Cap (ROC), lb (kg) | 1,950 (885) | |||
| SAE ROC with opt Counterweight, lb (kg) | 2,300 (1043) | |||
| Tipping Load, standard, lb (kg) | 3,900 (1769) | |||
| Boom, lb(kn) | 3,100 (13.7) | |||
| Bucket, lb(kn) | 5,500 (24.4) | |||
| Heaped Bucket Capacity, cu ft (cum) | 15.89 (0.45) | |||
| Reference Bucket Width, in (mm) | 72" (1830) | |||
| Self leveling bucket, Opt | Opt | |||
| DRIVE TRAIN | ||||
| Maximum Grnd Speed,stand,mph (kph) | 6.8 (10.9) | |||
| Two Speed Trans Grnd Speed,mph(kph) | Not applicable | |||
| Drive chain size | 80 HD | |||
| Axle torque, lb-ft (nm) | 4,725 (6406) | |||
| Standard Tire Size | 12x16.5 | |||
| DIMENSIONS | ||||
| Length with Bucket, in (mm) | 126" (3200) | |||
| Length Without Bucket,in (mm) | 102" (2590) | |||
| Width Without Bucket, in (mm) | 70" (1780) | |||
| Height to ROPS, in (mm) | 77" (1960) | |||
| Height to Hinge Pin, in (mm) | 115" (115) | |||
| Dump Height, in (mm) | 90" (2290) | |||
| Dump Reach, in (mm) | 28.1" (710) | |||
| Dump Angle, degrees | 45º | |||
| Bucket Rollback @ ground, degrees | 35º | |||
| Wheelbase, in (mm) | 42.3" (1070) | |||
| Ground Clearance, in (mm) | 9.6" (244) | |||
| Angle of Departure, degrees | 27º | |||
| OPERATING WEIGHT, STANDARD LB (kg) | 6,435 (2919) | |||
| Specifications are based on published information at the time of publication. Specifications are subject to change without notice. | ||||