| DATE OF SPECIFICATION | Mar-08 | |||
| ENGINE | ||||
| Manufacturer | John Deere | |||
| Model | 4024T | |||
| Gross Horsepower (kw) | 61 (45) | |||
| Net Horsepower (kw) | 57 (43) | |||
| Rated RPM | 2800 | |||
| Grosspeak Torque, lb-ft (nm) | 150 (203) | |||
| #Cylinders | 4 | |||
| Displacement, cuin(L) | 149 (2.4) | |||
| Engine aspiration | Turbocharged | |||
| Fuel Capacity, gal (L) | 16 (61) | |||
| HYDRAULIC SYSTEM | ||||
| Standard Pump Flow, gpm (L/min.) | 17 (64) | |||
| Optional High Flow, gpm (L/min.) | 27 (102) | |||
| System Pressure, PSI (KPA) | 3450 (23770) | |||
| Auxiliary Hydraulic Circuit, Std; Opt | Std | |||
| Hydraulic power, calculated, hp (kw) | 34.2 (25.5) | |||
| Opt High-Flw Hyd pwr,calculated,hp(kw) | 54.3 (40.8) | |||
| PERFORMANCE | ||||
| SAE Rated Oper Cap (ROC), lb (kg) | 1,750 (794) | |||
| SAE ROC with opt Counterweight, lb (kg) | 2,100 (953) | |||
| Tipping Load, standard, lb (kg) | 3,700 (1678) | |||
| Boom, lb(kn) | 3,100 (13.7) | |||
| Bucket, lb(kn) | 5,500 (24.4) | |||
| Heaped Bucket Capacity, cu ft (cum) | 14.48 (0.41) | |||
| Reference Bucket Width, in (mm) | 66" (1680) | |||
| Self leveling bucket, Opt | Opt | |||
| DRIVE TRAIN | ||||
| Maximum Grnd Speed,stand,mph (kph) | 6.8 (10.9) | |||
| Two Speed Trans Grnd Speed,mph(kph) | Not applicable | |||
| Drive chain size | 80 HD | |||
| Axle torque, lb-ft (nm) | 4,450 (6033) | |||
| Standard Tire Size | 10x16.5 | |||
| DIMENSIONS | ||||
| Length with Bucket, in (mm) | 126" (3200) | |||
| Length Without Bucket,in (mm) | 102" (2590) | |||
| Width Without Bucket, in (mm) | 63" (1600) | |||
| Height to ROPS, in (mm) | 75" (1910) | |||
| Height to Hinge Pin, in (mm) | 114" (114) | |||
| Dump Height, in (mm) | 89" (2260) | |||
| Dump Reach, in (mm) | 29.1" (740) | |||
| Dump Angle, degrees | 45º | |||
| Bucket Rollback @ ground, degrees | 35º | |||
| Wheelbase, in (mm) | 42" (1070) | |||
| Ground Clearance, in (mm) | 8.2" (208) | |||
| Angle of Departure, degrees | 27º | |||
| OPERATING WEIGHT, STANDARD LB (kg) | 6,300 (2858) | |||
| Specifications are based on published information at the time of publication. Specifications are subject to change without notice. | ||||