Owners and operators alike have expressed the need to reduce the time required for daily maintenance. Applicators also do not like to crawl under the machine to grease the rockshaft bearings.

The 2510C Conventional Applicator employs a high-density polymer bearing sleeve in each of the heavy-duty rockshaft arms for the mainframe, wing frames, and rear hitch.

The poly sleeves reduce the friction, wear, and force needed for operation. The result is a maintenance-free bearing (no greasing) with increased reliability.

The next level of frame technology has been introduced into the frame of the 2510C. Cast-steel saddle joints (patent pending) connect the 4-in. x 6-in. frame tubes and provide the backbone and support needed for the required speeds and loads of conventional anhydrous application. 
 
A fore-aft frame depth of 93 in. is unmatched in the conventional market and provides the clearance necessary to flow residue. 
 
An adequate distance between the front coulters allows the residue to settle down as it moves through the machine.

Size	Transport width	Transport height	Horsepower requirements
30-in. spacing
13 row	18 ft, 7 in.	13 ft, 4 in.	15 hp to 25 hp per shank at 6-in. to 8-in. depth
17 row	18 ft, 7 in.	13 ft, 4 in.	15 hp to 25 hp per shank at 6-in. to 8-in. depth

The 2510c is equipped for safe operation and safe transport with the following base equipment:

• Slow-moving vehicle emblem
• Hydraulic transport lockup valve
• Hitch safety chain
• Implement warning lights
• Reflective decals

The three-year warranty on any 2510 covers:

• All frame members including  depth control wheel modules (weldments and tubes), wing-fold components, the front hitch, gang bolts, and spools

All other components (disk standards, hydraulics, electronics, safety lights) and attachments, such as rear hitches, are under warranty for one year as the warranty definition has not changed. The same exclusions and administration as defined in the Warranty Administration Manual applies.
 
The following items are not under warranty:

• Wear items such as blades, pins, hinges, hitch link, hub, and plug-in spindles
• Breakage due to rocks
• Abuse or lack of maintenance
• Use of unapproved attachments such as tanks and rear hitches by other manufacturers
• Failure to follow operator's manual recommendations

Dura-Flex™ bearings will continue to have a two-year warranty.