Official Test
	Nebraska Test Number			---
Engine
	Manufacturer			John Deere
	Aspiration			Variable Geometry Turbocharger w/Air-to-Air Aftercooling and Exhaust Gas Recirculation
	Cylinders/Displacement, cu. in. (liters)			6/824 (13.5)
	Cylinder Liners			Wet Sleeve
	Fuel Tank Cap., US Gal. (L) (Open; Cab)			350 (1325)
		Standard		350 (1325)
		Optional		---
	Underhood muffler			---
Performance
	Advertised PTO HP (kW) @ Rated RPM			N/A
	Official PTO HP (kW) @ Rated RPM			---
		@ Standard PTO @ Eng RPM		---
		Maximum @ Eng RPM		---
	Advertised Engine HP (kW) @ Rated Speed			491 (361) @2100 per ISO 97/68/EC
	Max Unballast Drwbr HP (kW) @ Eng RPM			-
	Maximum Torque (PTO) @ RPM, lb-ft (Nm)			---
	Max Torque Rise (80% Rtd Spd) @ Eng RPM			38%
	Maximum Torque Rise % (PTO) @ Eng RPM			---
Fuel Use, U.S. gal./hr. & HP hr./gal. at:
	PTO @ Rated Eng RPM			---
	Standard PTO Speed @ Eng Speed			---
	Maximum PTO Power @ Eng RPM			---
	Maximum Engine Power @ Eng RPM			---
	Max Unballasted Drawbar Power @ Eng RPM			---
	75% Load, Full Engine RPM (Unballasted)			---
	75% Load @ Reduced RPM (Unballasted)			---
Transmission
	Std. Transmission; Forward/Reverse			18/6 Powershift
	Opt. Transmission; Forward/Reverse			---
	Reverser			---
	On-the-Go Shifting (Yes/No/Partial)			Yes
	Clutch; Wet/Dry			Wet
	Creeper			---
Power Take-Off (PTO)
	Standard			---
	Optional			---
	PTO Speeds @ Engine RPM			---
	PTO Actuation			---
Hydraulics
	Type			Common Flow, Pressure & Flow Compensating
	Pump Rated Output, GPM (L/min.)			---
		Standard		48 (182)
		Optional		75 (283)
	Rated Flow @ One SCV, GPM (L/min.)			30 (114)
	Max Output @ SCV Couplers, GPM (L/min.)			---
	Maximum Operating Pressure, PSI (kPa)			2900 (20000)
	Maximum Hydraulic Power, HP (kW)			-
	Hitch Draft Control Load Sense Type			---
	Remote Control Valves Available			4 Std.
	Hitch Category (SAE Designation)			NA
	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt.			---
		OECD		---
		Standard		-
		Optional		-
	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE)			---
		Standard		---
		Optional		---
	Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE)			---
		Standard		---
		Optional		---
	Sensing Type			Electrohydraulic
	Joystick SCV Control			---
Final Drive
	Type			Inboard Planetary, with Double Reduction Axle
	Differential Controls			Electrohydraulic
	Availability			---
		Front		---
		Front & Rear		Optional
	Engage On-the-Go Rear Differential Lock			Yes
	Axle Type			---
	Brakes, Type and Control			---
Operator Station
	Rollover Protective Structure, OOS			---
		Rigid - Foldable - Telescopic		---
		Platform - Flat/Straddle		---
		Gearshift Location - Console/Floor		---
	Cab			---
		Doors		1 - LH
		Platform - Flat/Straddle		---
		dB(A) Rating		-
		Seat Suspension System		Air (Std.), Active (Opt.)
2WD Dimensions
	Wheelbase, in. (mm)			---
	Front Tread Range, in. (mm)			---
	Rear Tread Range, in. (mm)			---
	Minimum Rear Tread Setting, in. (mm)			---
	Front Axle Clearance, in. (mm)			---
	Turning Radius w/Brakes, ft. (m)			---
	Turning Radius w/o Brakes, ft. (m)			---
	Unballasted Operating Weight, lb. (kg)			---
	Approx. Ship Wgt, lb. (kg) Open; Cab			---
MFWD Dimensions
	Wheelbase, in. (mm)			---
	Front Tread Range, in. (mm)			---
	Front Axle Clearance, in. (mm)			---
	Turning Radius w/Brakes, ft. (m)			---
	Turning Radius w/o Brakes, ft. (m)			---
	Limited Slip Differential			---
	Unballasted Operating Weight, lb. (kg)			---
	Approx. Ship Wgt, lb. (kg) Open; Cab			---
4WD Dimensions
	Wheelbase, in. (mm)			137.8 (3500)
	Wheel Tread, Min. to Max. in. (mm)			60 - 132 (1524 - 3353)
	Turning Radius w/o Brakes, ft. (m)			14.6 (4.45)
	Nebraska Test Unballasted w/Duals, lb.(kg)			---
	Unballasted Weight, lb. (kg)			36,090 (16,370) (less 3-pt and PTO)
Standard Tires
	2WD			---
		Front		---
		Rear		---
	MFWD			---
		Front		---
		Rear		---
	4WD			710/70 R38 (Group 48)
	Track Widths			---
Miscellaneous
	Country of Manufacture			Waterloo, Iowa, USA
	Ballasting Restrictions, lb. (kg)			Lesser of 57,000 (25,855) or Tire Capacity
	*Notes			Updated - 03/17/2009