| Official Test |
 |
|
Nebraska Test Number |
Nebraska OECD Test 1923, Summary 593
|
|
|
| Engine |
|
|
Manufacturer |
John Deere 6.8L PowerTech Plus (4-valve) engine
|
|
|
|
Aspiration |
Standard Variable Geometry Turbocharger with air-to-water aftercooling and exhaust gas recirculation (PowerTech Plus); Optional fixed geometry turbocharger with air-to-water aftercooling (PowerTech E)
|
|
|
|
Cylinders/Displacement, cu. in. (liters) |
6/415 (6.8)
|
|
|
|
Cylinder Liners |
Wet sleeve
|
|
|
|
Fuel Tank Cap., US Gal. (L) (Open; Cab) |
---
|
|
|
|
|
Standard |
80 (305)
|
|
|
|
|
Optional |
---
|
|
|
|
Underhood muffler |
N/A
|
|
|
| Performance |
|
|
Advertised PTO HP (kW) @ Rated RPM |
140 (104.39) @ 2100 per SAE
|
|
|
|
Official PTO HP (kW) @ Rated RPM |
141.13 (105.24) @ 2101 per SAE
|
|
|
|
|
@ Standard PTO @ Eng RPM |
157.31 (117.30) @ 1961 per SAE
|
|
|
|
|
Maximum @ Eng RPM |
161.22 (107.36) @ 1701 per SAE
|
|
|
|
Advertised Engine HP (kW) @ Rated Speed |
166 (124.0) @ 2100 per ISO 97/68/EC
|
|
|
|
Max Unballast Drwbr HP (kW) @ Eng RPM |
142.15 (106.00) @ 1697
|
|
|
|
Maximum Torque (PTO) @ RPM, lb-ft (Nm) |
513 (695) @1602
|
|
|
|
Max Torque Rise (80% Rtd Spd) @ Eng RPM |
41% @ 1699
|
|
|
|
Maximum Torque Rise % (PTO) @ Eng RPM |
45.2% @ 1602
|
|
|
| Fuel Use, U.S. gal./hr. & HP hr./gal. at: |
|
|
PTO @ Rated Eng RPM |
8.48 (32.08) & 16.65 (3.28) @ 2101
|
|
|
|
Standard PTO Speed @ Eng Speed |
9.09 (34.45) & 17.30 (3.40) @ 1961
|
|
|
|
Maximum PTO Power @ Eng RPM |
9.34 (35.37) & 17.26 (3.40) @ 1701
|
|
|
|
Maximum Engine Power @ Eng RPM |
8.39 (31.76) & 15.08 (2.97) @ 2099
|
|
|
|
Max Unballasted Drawbar Power @ Eng RPM |
9.33 (35.32) & 15.24 (3.00) @ 1697
|
|
|
|
75% Load, Full Engine RPM (Unballasted) |
7.31 (27.67) & 13.71 (2.70) @ 2175
|
|
|
|
75% Load @ Reduced RPM (Unballasted) |
6.95 (26.31) & 14.41 (2.84) @ 1717
|
|
|
| Transmission |
|
|
Std. Transmission; Forward/Reverse |
PowrQuad Plus 16/16 (19 mph/ 30 kmh) w/ PowerTech Plus (4-valve) engine
|
|
|
|
Opt. Transmission; Forward/Reverse |
PowerQuad Plus 16/16 (19 mph/30 kmh) w/ PowerTech E (2-valve); AutoQuad Plus 20/20 (25 mph/40 kmh) w/ Power Tech Plus (4-valve); IVT (25 mph/40 kmh) w/ PowerTech Plus (4-valve)
|
|
|
|
Reverser |
LH Base
|
|
|
|
On-the-Go Shifting (Yes/No/Partial) |
Yes
|
|
|
|
Clutch; Wet/Dry |
Wet
|
|
|
|
Creeper |
Available with PowrQuad Plus and AutoQuad Plus
|
|
|
| Power Take-Off (PTO) |
|
|
Standard |
Independent 540/1000 rpm w/ reversible shaft
|
|
|
|
Optional |
Rear - 540E/1000/1000E rpm, reversible shaft, shiftable in cab; (Front - 1000 rpm, 21 spline)
|
|
|
|
PTO Speeds @ Engine RPM |
540 @ 1778 or 1000 @ 1950: Economy PTO 1000 @ 1950
|
|
|
|
PTO Actuation |
Electrohydraulic
|
|
|
| Hydraulics |
|
|
Type |
Closed-center, Pressure and Flow Compensated
|
|
|
|
Pump Rated Output, GPM (L/min.) |
---
|
|
|
|
|
Standard |
29 (109.8)
|
|
|
|
|
Optional |
---
|
|
|
|
Rated Flow @ One SCV, GPM (L/min.) |
29.4 (111.2)
|
|
|
|
Max Output @ SCV Couplers, GPM (L/min.) |
29.9 (113.0)
|
|
|
|
Maximum Operating Pressure, PSI (kPa) |
2900 (19,995)
|
|
|
|
Maximum Hydraulic Power, HP (kW) |
43.2 (32.2)
|
|
|
|
Hitch Draft Control Load Sense Type |
Electrohydraulic
|
|
|
|
Remote Control Valves Available |
Mechanical - Std. 2, (Opt. 3-4); Opt. Electrohydraulic - 2-4
|
|
|
|
Hitch Category (SAE Designation) |
Standard III
|
|
|
|
Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. |
---
|
|
|
|
|
OECD |
---
|
|
|
|
|
Standard |
10,600 Advertised
|
|
|
|
|
Optional |
---
|
|
|
|
Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE) |
---
|
|
|
|
|
Standard |
11,049 (49.1) NE Tested
|
|
|
|
|
Optional |
---
|
|
|
|
Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE) |
---
|
|
|
|
|
Standard |
---
|
|
|
|
|
Optional |
---
|
|
|
|
Sensing Type |
Electronic Lower Link
|
|
|
|
Joystick SCV Control |
Mechanical or Electronic
|
|
|
| Final Drive |
|
|
Type |
Inboard Planetary
|
|
|
|
Differential Controls |
Electrohydraulic
|
|
|
|
Availability |
---
|
|
|
|
|
Front |
Yes
|
|
|
|
|
Front & Rear |
Yes
|
|
|
|
Engage On-the-Go Rear Differential Lock |
Yes
|
|
|
|
Axle Type |
Rack and Pinion
|
|
|
|
Brakes, Type and Control |
Hydraulic Wet Disk
|
|
|
| Operator Station |
|
|
Rollover Protective Structure, OOS |
N/A
|
|
|
|
|
Rigid - Foldable - Telescopic |
N/A
|
|
|
|
|
Platform - Flat/Straddle |
N/A
|
|
|
|
|
Gearshift Location - Console/Floor |
N/A
|
|
|
|
Cab |
ComfortGard Premium Cab w/ PowrQuad Plus, AutoQuad Plus; ComfortGard Premium Plus Cab w/ IVT
|
|
|
|
|
Doors |
1, opt 2
|
|
|
|
|
Platform - Flat/Straddle |
Flat
|
|
|
|
|
dB(A) Rating |
Tested 65.8 with IVT @ 1230 engine rpm: 70.5 with IVT @ 2250 engine rpm
|
|
|
|
|
Seat Suspension System |
Mechanical Seat w/ ComfortGard Premium Cab (opt. air); Air Seat w/ ComfortGard Premium Plus Cab w/ IVT
|
|
|
| 2WD Dimensions |
|
|
Wheelbase, in. (mm) |
N/A
|
|
|
|
Front Tread Range, in. (mm) |
N/A
|
|
|
|
Rear Tread Range, in. (mm) |
N/A
|
|
|
|
Minimum Rear Tread Setting, in. (mm) |
N/A
|
|
|
|
Front Axle Clearance, in. (mm) |
N/A
|
|
|
|
Turning Radius w/Brakes, ft. (m) |
N/A
|
|
|
|
Turning Radius w/o Brakes, ft. (m) |
N/A
|
|
|
|
Unballasted Operating Weight, lb. (kg) |
N/A
|
|
|
|
Approx. Ship Wgt, lb. (kg) Open; Cab |
N/A
|
|
|
| MFWD Dimensions |
|
|
Wheelbase, in. (mm) |
105.7 (2685)
|
|
|
|
Front Tread Range, in. (mm) |
60-88 (1524-2235)
|
|
|
|
Front Axle Clearance, in. (mm) |
N/A
|
|
|
|
Turning Radius w/Brakes, ft. (m) |
15.1 (4.6)
|
|
|
|
Turning Radius w/o Brakes, ft. (m) |
16.8 (5.1)
|
|
|
|
Limited Slip Differential |
Yes
|
|
|
|
Unballasted Operating Weight, lb. (kg) |
N/A
|
|
|
|
Approx. Ship Wgt, lb. (kg) Open; Cab |
14,594 (6,620)
|
|
|
| 4WD Dimensions |
|
|
Wheelbase, in. (mm) |
N/A
|
|
|
|
Wheel Tread, Min. to Max. in. (mm) |
N/A
|
|
|
|
Turning Radius w/o Brakes, ft. (m) |
N/A
|
|
|
|
Nebraska Test Unballasted w/Duals, lb.(kg) |
N/A
|
|
|
|
Unballasted Weight, lb. (kg) |
N/A
|
|
|
| Standard Tires |
|
|
2WD |
---
|
|
|
|
|
Front |
N/A
|
|
|
|
|
Rear |
N/A
|
|
|
|
MFWD |
---
|
|
|
|
|
Front |
16.9R28
|
|
|
|
|
Rear |
18.4R42
|
|
|
|
4WD |
N/A
|
|
|
|
Track Widths |
N/A
|
|
|
| Miscellaneous |
|
|
Country of Manufacture |
Waterloo, IA
|
|
|
|
Ballasting Restrictions, lb. (kg) |
Refer to Operator's Manual
|
|
|
|
*Notes |
Updated - 04/03/2009
|
|
|