| Official Test | ||||
| Nebraska Test Number | Factory Observed | |||
| Engine | ||||
| Manufacturer | John Deere PowerTech E 4045 | |||
| Aspiration | Turbocharged | |||
| Cylinders/Displacement, cu. in. (liters) | 4/276 (4.5) | |||
| Cylinder Liners | Wet Sleeved | |||
| Fuel Tank Cap., US Gal. (L) (Open; Cab) | --- | |||
| Standard | 29 (110) ; 38 (144) | |||
| Optional | --- | |||
| Underhood muffler | Yes | |||
| Performance | ||||
| Advertised PTO HP (kW) @ Rated RPM | 90 (67.1) @ 2100 per SAE | |||
| Official PTO HP (kW) @ Rated RPM | --- | |||
| @ Standard PTO @ Eng RPM | --- | |||
| Maximum @ Eng RPM | --- | |||
| Advertised Engine HP (kW) @ Rated Speed | 105 (78.3) @ 2100 per ISO 97/68/EC | |||
| Max Unballast Drwbr HP (kW) @ Eng RPM | --- | |||
| Maximum Torque (PTO) @ RPM, lb-ft (Nm) | 420 @ 1400 | |||
| Max Torque Rise (80% Rtd Spd) @ Eng RPM | --- | |||
| Maximum Torque Rise % (PTO) @ Eng RPM | 30 @ 1400 | |||
| Fuel Use, U.S. gal./hr. & HP hr./gal. at: | ||||
| PTO @ Rated Eng RPM | --- | |||
| Standard PTO Speed @ Eng Speed | --- | |||
| Maximum PTO Power @ Eng RPM | --- | |||
| Maximum Engine Power @ Eng RPM | --- | |||
| Max Unballasted Drawbar Power @ Eng RPM | --- | |||
| 75% Load, Full Engine RPM (Unballasted) | --- | |||
| 75% Load @ Reduced RPM (Unballasted) | --- | |||
| Transmission | ||||
| Std. Transmission; Forward/Reverse | 16F/16R PowrReveser | |||
| Opt. Transmission; Forward/Reverse | 32F/16R PowrReverser Plus | |||
| Reverser | Left Hand, Electrohydraulic | |||
| On-the-Go Shifting (Yes/No/Partial) | Partial | |||
| Clutch; Wet/Dry | Wet | |||
| Creeper | 16F/16R PowrReverser, 32F/16R PowrReverser Plus | |||
| Power Take-Off (PTO) | ||||
| Standard | Independent 540/540 Economy | |||
| Optional | 540/540E/1000 | |||
| PTO Speeds @ Engine RPM | 540 @ 2100; 540E @ 1645 | |||
| PTO Actuation | Electro-hydraulic | |||
| Hydraulics | ||||
| Type | Open Center | |||
| Pump Rated Output, GPM (L/min.) | --- | |||
| Standard | 24.7 (93.6) | |||
| Optional | --- | |||
| Rated Flow @ One SCV, GPM (L/min.) | 18.4 (69.9) | |||
| Max Output @ SCV Couplers, GPM (L/min.) | --- | |||
| Maximum Operating Pressure, PSI (kPa) | 2900 (20000) | |||
| Maximum Hydraulic Power, HP (kW) | 31.1 (23.2) | |||
| Hitch Draft Control Load Sense Type | Mechanical or Electro-hydraulic | |||
| Remote Control Valves Available | up to three | |||
| Hitch Category (SAE Designation) | 2; convertible to 1 | |||
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. | --- | |||
| OECD | --- | |||
| Standard | 4498 (2041) | |||
| Optional | --- | |||
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE) | --- | |||
| Standard | --- | |||
| Optional | --- | |||
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE) | --- | |||
| Standard | --- | |||
| Optional | --- | |||
| Sensing Type | Lower Link | |||
| Joystick SCV Control | Optional | |||
| Final Drive | ||||
| Type | Inboard Planetary | |||
| Differential Controls | Electro-hydraulic | |||
| Availability | --- | |||
| Front | No | |||
| Front & Rear | No | |||
| Engage On-the-Go Rear Differential Lock | Yes | |||
| Axle Type | Flanged | |||
| Brakes, Type and Control | Hydraulic Wet Disc | |||
| Operator Station | ||||
| Rollover Protective Structure, OOS | --- | |||
| Rigid - Foldable - Telescopic | Foldable, 2-Post | |||
| Platform - Flat/Straddle | Flat | |||
| Gearshift Location - Console/Floor | Floor | |||
| Cab | --- | |||
| Doors | 2 | |||
| Platform - Flat/Straddle | Flat | |||
| dB(A) Rating | 80 | |||
| Seat Suspension System | Mechanical (opt. Air Ride) | |||
| 2WD Dimensions | ||||
| Wheelbase, in. (mm) | --- | |||
| Front Tread Range, in. (mm) | --- | |||
| Rear Tread Range, in. (mm) | --- | |||
| Minimum Rear Tread Setting, in. (mm) | --- | |||
| Front Axle Clearance, in. (mm) | --- | |||
| Turning Radius w/Brakes, ft. (m) | --- | |||
| Turning Radius w/o Brakes, ft. (m) | --- | |||
| Unballasted Operating Weight, lb. (kg) | --- | |||
| Approx. Ship Wgt, lb. (kg) Open; Cab | --- | |||
| MFWD Dimensions | ||||
| Wheelbase, in. (mm) | 85.6 (2178) | |||
| Front Tread Range, in. (mm) | 52.8 - 75.0 (1340 - 1904) | |||
| Front Axle Clearance, in. (mm) | 17.9 (454) | |||
| Turning Radius w/Brakes, ft. (m) | 11.6 (3.5) | |||
| Turning Radius w/o Brakes, ft. (m) | 13.9 (4.2) | |||
| Limited Slip Differential | Yes | |||
| Unballasted Operating Weight, lb. (kg) | --- | |||
| Approx. Ship Wgt, lb. (kg) Open; Cab | 7300 (3311); 8400 (3810) | |||
| 4WD Dimensions | ||||
| Wheelbase, in. (mm) | --- | |||
| Wheel Tread, Min. to Max. in. (mm) | --- | |||
| Turning Radius w/o Brakes, ft. (m) | --- | |||
| Nebraska Test Unballasted w/Duals, lb.(kg) | --- | |||
| Unballasted Weight, lb. (kg) | --- | |||
| Standard Tires | ||||
| 2WD | --- | |||
| Front | --- | |||
| Rear | --- | |||
| MFWD | --- | |||
| Front | 12.4R24 R1 | |||
| Rear | 480/80R30 R1W | |||
| 4WD | --- | |||
| Track Widths | --- | |||
| Miscellaneous | ||||
| Country of Manufacture | Augusta, GA | |||
| Ballasting Restrictions, lb. (kg) | --- | |||
| *Notes | Updated 7/1/2009 | |||