| Official Test |
 |
|
Nebraska Test Number |
Factory observed
|
|
|
| Engine |
|
|
Manufacturer |
John Deere PowerTech M 4045
|
|
|
|
Aspiration |
Turbocharged
|
|
|
|
Cylinders/Displacement, cu. in. (liters) |
4/276 (4.5)
|
|
|
|
Cylinder Liners |
Wet Sleeved
|
|
|
|
Fuel Tank Cap., US Gal. (L) (Open; Cab) |
---
|
|
|
|
|
Standard |
29 (110); 38 (144)
|
|
|
|
|
Optional |
---
|
|
|
|
Underhood muffler |
Yes
|
|
|
| Performance |
|
|
Advertised PTO HP (kW) @ Rated RPM |
80 (59.6) @ 2100 per SAE
|
|
|
|
Official PTO HP (kW) @ Rated RPM |
---
|
|
|
|
|
@ Standard PTO @ Eng RPM |
---
|
|
|
|
|
Maximum @ Eng RPM |
---
|
|
|
|
Advertised Engine HP (kW) @ Rated Speed |
95 (70.8) @ 2200 per 97/68/EC
|
|
|
|
Max Unballast Drwbr HP (kW) @ Eng RPM |
---
|
|
|
|
Maximum Torque (PTO) @ RPM, lb-ft (Nm) |
372 @ 1600
|
|
|
|
Max Torque Rise (80% Rtd Spd) @ Eng RPM |
---
|
|
|
|
Maximum Torque Rise % (PTO) @ Eng RPM |
26 @ 1600
|
|
|
| Fuel Use, U.S. gal./hr. & HP hr./gal. at: |
|
|
PTO @ Rated Eng RPM |
---
|
|
|
|
Standard PTO Speed @ Eng Speed |
---
|
|
|
|
Maximum PTO Power @ Eng RPM |
---
|
|
|
|
Maximum Engine Power @ Eng RPM |
---
|
|
|
|
Max Unballasted Drawbar Power @ Eng RPM |
---
|
|
|
|
75% Load, Full Engine RPM (Unballasted) |
---
|
|
|
|
75% Load @ Reduced RPM (Unballasted) |
---
|
|
|
| Transmission |
|
|
Std. Transmission; Forward/Reverse |
16F/16R SyncReveser
|
|
|
|
Opt. Transmission; Forward/Reverse |
12F/4R SyncShuttle Plus, 16F/16R PowrReverser, 32F/16R PowrReverser Plus
|
|
|
|
Reverser |
Left Hand, Mechanical
|
|
|
|
On-the-Go Shifting (Yes/No/Partial) |
Partial
|
|
|
|
Clutch; Wet/Dry |
Wet
|
|
|
|
Creeper |
12F/4R SyncShuttle Plus, 16F/16R PowrReverser, 32F/16R PowrReverser Plus
|
|
|
| Power Take-Off (PTO) |
|
|
Standard |
Independent 540/540 Economy
|
|
|
|
Optional |
540/540E/1000
|
|
|
|
PTO Speeds @ Engine RPM |
540 @ 2100; 540E @ 1645
|
|
|
|
PTO Actuation |
Electrohydraulic
|
|
|
| Hydraulics |
|
|
Type |
Open Center
|
|
|
|
Pump Rated Output, GPM (L/min.) |
---
|
|
|
|
|
Standard |
24.7 (93.6)
|
|
|
|
|
Optional |
---
|
|
|
|
Rated Flow @ One SCV, GPM (L/min.) |
18.4 (69.9)
|
|
|
|
Max Output @ SCV Couplers, GPM (L/min.) |
---
|
|
|
|
Maximum Operating Pressure, PSI (kPa) |
2900 (20000)
|
|
|
|
Maximum Hydraulic Power, HP (kW) |
31.1 (23.2)
|
|
|
|
Hitch Draft Control Load Sense Type |
Mechanical or Electrohydraulic
|
|
|
|
Remote Control Valves Available |
0 (opt. 3)
|
|
|
|
Hitch Category (SAE Designation) |
2; convertible to 1
|
|
|
|
Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. |
---
|
|
|
|
|
OECD |
---
|
|
|
|
|
Standard |
3595 (1631)
|
|
|
|
|
Optional |
4498 (2041)
|
|
|
|
Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE) |
---
|
|
|
|
|
Standard |
---
|
|
|
|
|
Optional |
---
|
|
|
|
Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE) |
---
|
|
|
|
|
Standard |
---
|
|
|
|
|
Optional |
---
|
|
|
|
Sensing Type |
Lower Link
|
|
|
|
Joystick SCV Control |
Optional
|
|
|
| Final Drive |
|
|
Type |
Inboard Planetary
|
|
|
|
Differential Controls |
Electrohydraulic
|
|
|
|
Availability |
---
|
|
|
|
|
Front |
No
|
|
|
|
|
Front & Rear |
No
|
|
|
|
Engage On-the-Go Rear Differential Lock |
Yes
|
|
|
|
Axle Type |
Flanged
|
|
|
|
Brakes, Type and Control |
Hydraulic Wet Disc
|
|
|
| Operator Station |
|
|
Rollover Protective Structure, OOS |
---
|
|
|
|
|
Rigid - Foldable - Telescopic |
Foldable, 2-Post
|
|
|
|
|
Platform - Flat/Straddle |
Flat
|
|
|
|
|
Gearshift Location - Console/Floor |
Floor
|
|
|
|
Cab |
---
|
|
|
|
|
Doors |
2
|
|
|
|
|
Platform - Flat/Straddle |
Flat
|
|
|
|
|
dB(A) Rating |
80
|
|
|
|
|
Seat Suspension System |
Mechanical (opt. Air Ride)
|
|
|
| 2WD Dimensions |
|
|
Wheelbase, in. (mm) |
85.6 (2175)
|
|
|
|
Front Tread Range, in. (mm) |
57.6 - 82.6 (1463 - 2098)
|
|
|
|
Rear Tread Range, in. (mm) |
53.1 - 80.9 (1348-2054)
|
|
|
|
Minimum Rear Tread Setting, in. (mm) |
53.1 (1348)
|
|
|
|
Front Axle Clearance, in. (mm) |
18.8 (477.5)
|
|
|
|
Turning Radius w/Brakes, ft. (m) |
11.2 (3.51)
|
|
|
|
Turning Radius w/o Brakes, ft. (m) |
12.8 (3.90)
|
|
|
|
Unballasted Operating Weight, lb. (kg) |
---
|
|
|
|
Approx. Ship Wgt, lb. (kg) Open; Cab |
6500 (2948); 7700 (3515)
|
|
|
| MFWD Dimensions |
|
|
Wheelbase, in. (mm) |
85.6 (2178)
|
|
|
|
Front Tread Range, in. (mm) |
52.8 - 75.0 (1340 - 1904)
|
|
|
|
Front Axle Clearance, in. (mm) |
17.9 (454)
|
|
|
|
Turning Radius w/Brakes, ft. (m) |
11.6 (3.5)
|
|
|
|
Turning Radius w/o Brakes, ft. (m) |
12.8 (3.9)
|
|
|
|
Limited Slip Differential |
Yes
|
|
|
|
Unballasted Operating Weight, lb. (kg) |
---
|
|
|
|
Approx. Ship Wgt, lb. (kg) Open; Cab |
7000 (3175); 8150 (3697)
|
|
|
| 4WD Dimensions |
|
|
Wheelbase, in. (mm) |
---
|
|
|
|
Wheel Tread, Min. to Max. in. (mm) |
---
|
|
|
|
Turning Radius w/o Brakes, ft. (m) |
---
|
|
|
|
Nebraska Test Unballasted w/Duals, lb.(kg) |
---
|
|
|
|
Unballasted Weight, lb. (kg) |
---
|
|
|
| Standard Tires |
|
|
2WD |
---
|
|
|
|
|
Front |
11L-15 8PR F2
|
|
|
|
|
Rear |
480/80R30 R1W
|
|
|
|
MFWD |
---
|
|
|
|
|
Front |
12.4R24 R1
|
|
|
|
|
Rear |
480/80R30 R1W
|
|
|
|
4WD |
---
|
|
|
|
Track Widths |
---
|
|
|
| Miscellaneous |
|
|
Country of Manufacture |
Augusta, GA
|
|
|
|
Ballasting Restrictions, lb. (kg) |
---
|
|
|
|
*Notes |
Updated 9/30/2008
|
|
|