Engine
Manufacturer John Deere 4024T
Engine HP (kW) - gross 43.0 (31.6) per ISO 97/68/EC
PTO HP (kW) - Gear transmission 37.0 (27.6) per SAE
PTO HP (kW) - Hydrostatic transmission 35.0 (26.1) per SAE
Rated engine speed, rpm 2400
Type Diesel
Operating range 950-2600
Aspiration Turbo
Cylinders/Displacement, cu. in. (liters) 4 / 148.9 (2.44)
Cylinder Liners Cast-in-block
Bore and Stroke, mm (in.) 86x105 (3.39x4.13)
Compression Ratio 20:1
Lubrication Pressurized
Cooling System Water pump
Air Cleaner Dry type w/ safety element and air restriction indicator
Engine Shutoff Key switch
Engine Torque @ rated speed, ft./lb. (N/m) 95.0 (128.8)
Fuel Tank Cap., US Gal. (L) (Open; Cab) Open-14.5 (54.9)
Electrical
Type 12 volt
Battery Size (CCA) 770
Alternator (12 volt, amp) 70 amp
Starter Size, hp (kW) 2.2 (2.3)
Fuel System
Type Direct injection
Injection Pump Type In-line with electric shutoff
U.S. gal./hr (L/hr) @ 100% load* 2.46 (9.3)
*Fuel consumption rate should be used for comparison purposes only. ---
Transmission
Std. Transmission; Forward/Reverse PowrReverser; 12F/12R
Opt. Transmission; Forward/Reverse eHydro - 3 range
Left-Hand Reverser Yes / NA
On-The-Go Shifting (Yes/No/Partial) Yes / NA
Direction Reverser; Forward/Reverse Yes / NA
Final Drive Planetary
Brakes Wet disk
Steering Power steering
Clutch; Wet/Dry Two wet multi-disk / NA
Clutch Disk Diameter, in. (mm) wet clutch 5.1 (130) / NA
Drawbar Tongue Weight Capacity, lb. (kg) 1102 (500)
Axle Capacity (in operation) ---
Front, lb. (kg) 3527 (1600) or total combined front tire capacity, whichever is less.
Rear, lb. (kg) 5292 (2400)
Creeper No / Optional SpeedMatch
Hydraulics
Type Open Center
Pump Rated Output, gpm (L/min.) 17.1 (64.6)
Steering 5.1 (19.3)
Implement 12 (45.3)
Pump Type Dual gear
Maximum Operating Pressure (PSI) 2500
Draft Control Type Position Control
Remote Control Valves Available 5
3-Point Hitch
Type Category I
Lift Capacity (24-in. behind link arms), lb. (kg) 2500 (1134)
Lift Capacity @ lift link ends, lb. (kg) 3130 (1419)
Power Take-Off (PTO)
Standard Rear @ 540 RPM
Optional Mid @ 2100 RPM
Control Independent
Clutch Multi-disk, wet
Brake (for Mid and Rear PTO) Multi-disk, wet
Fluid Capacities
Fuel Tank, gal. (l) 14.9 (54.9)
Cooling system (includes coolant bottle), qt. (l) 6.4 (6.2)
Crankcase with filter, qt. (l) 8 (7.5)
Transmission and Hydraulic System, gal. (l) gear 10.3 (38.9)
Transmission and Hydraulic System, gal. (l) hydrostatic 9.6 (36.1)
Front Axle Gearcase (MFWD axle), gal. (l) 1.3(5)
Final Drive
Type Planetary
Engage On-the-Go Rear Differential Lock Yes
Operator Station
Rollover Protective Structure OSHA, SAE, ASAE
Rigid - Foldable - Telescopic Foldable
Platform - Flat/Straddle Flat
Gear Shift Location - Console/Floor Left Hand Side
Cab
Compliance ---
Visibility ---
Air Conditioning, Temperature Differential ---
Doors ---
Platform - Flat/Straddle ---
dB(A) Rating ---
Seat Suspension System ---
2WD Dimensions
Wheelbase, in. (mm) NA
Front Tread Range, in. (mm) NA
Rear Tread Range, in. (mm) NA
Minimum Rear Tread Setting, in. (mm) NA
Front Axle Clearance, in. (mm) NA
Turning Radius w/Brakes, ft. (m) NA
Turning Radius w/o Brakes, ft. (m) NA
Unballasted Operating Weight, lb. (kg) NA
Approx. Ship Wgt, lb. (kg) Open; Cab ---
MFWD Dimensions
Wheelbase, in. (mm) 71.5 (1816)
Front Tread Range, in. (mm) ---
Front Axle Clearance, in. (mm) ---
Turning Radius w/Brakes, ft. (m) 9.2 (2.8)
Turning Radius w/o Brakes, ft. (m) 9.8 (3)
Limited Slip Differential ---
Unballasted Operating Weight, lb. (kg) ---
Approx. Ship Wgt, lb. (kg) Open; Cab 3700 (1679)
Standard Tires
2WD ---
Front NA
Rear NA
MFWD ---
Front 8.00-16 R1
Rear 13.6-28 R1
Miscellaneous
Underhood Muffler Yes
Joystick SCV Control Yes
Inboard Planetary Yes
Axle Type Flanged
Brakes - Type and Control Wet Disk