| DATE OF SPECIFICATION | Mar-08 | |||
| ENGINE | ||||
| Manufacturer | John Deere | |||
| Model | 5030T | |||
| Gross Horsepower (kw) | 76 (57) | |||
| Net Horsepower (kw) | 70 (52) | |||
| Rated RPM | 2800 | |||
| Grosspeak Torque, lb-ft (nm) | 194 (263) | |||
| #Cylinders | 5 | |||
| Displacement, cuin(L) | 186 (3.1) | |||
| Engine aspiration | Turbocharged | |||
| Fuel Capacity, gal (L) | 24 (91) | |||
| HYDRAULIC SYSTEM | ||||
| Standard Pump Flow, gpm (L/min.) | 22 (83) | |||
| Optional High Flow, gpm (L/min.) | 34 (129) | |||
| System Pressure, PSI (KPA) | 3100 (21360) | |||
| Auxiliary Hydraulic Circuit, Std; Opt | Std | |||
| Hydraulic power, calculated, hp (kw) | 39.8 (29.6) | |||
| Opt High-Flw Hyd pwr,calculated,hp(kw) | 61.5 (46.1) | |||
| PERFORMANCE | ||||
| SAE Rated Oper Cap (ROC), lb (kg) | 2,500 (1134) | |||
| SAE ROC with opt Counterweight, lb (kg) | 2,850 (1293) | |||
| Tipping Load, standard, lb (kg) | 5,000 (2268) | |||
| Boom, lb(kn) | 4,800 (21.3) | |||
| Bucket, lb(kn) | 7,500 (33.2) | |||
| Heaped Bucket Capacity, cu ft (cum) | 17.66 (0.50) | |||
| Reference Bucket Width, in (mm) | 78" (1980) | |||
| Self leveling bucket, Opt | Opt | |||
| DRIVE TRAIN | ||||
| Maximum Grnd Speed,stand,mph (kph) | 6 (9.7) | |||
| Two Speed Trans Grnd Speed,mph(kph) | 11 (17.6) | |||
| Drive chain size | 100 Hz | |||
| Axle torque, lb-ft (nm) | 5,680 (7701) | |||
| Standard Tire Size | 12x16.5 | |||
| DIMENSIONS | ||||
| Length with Bucket, in (mm) | 139" (3530) | |||
| Length Without Bucket,in (mm) | 116" (2950) | |||
| Width Without Bucket, in (mm) | 74" (1880) | |||
| Height to ROPS, in (mm) | 81" (2060) | |||
| Height to Hinge Pin, in (mm) | 125" (125) | |||
| Dump Height, in (mm) | 100" (2540) | |||
| Dump Reach, in (mm) | 34" (860) | |||
| Dump Angle, degrees | 45º | |||
| Bucket Rollback @ ground, degrees | 35º | |||
| Wheelbase, in (mm) | 48" (1220) | |||
| Ground Clearance, in (mm) | 9" (229) | |||
| Angle of Departure, degrees | 27º | |||
| OPERATING WEIGHT, STANDARD LB (kg) | 8,390 (3806) | |||
| Specifications are based on published information at the time of publication. Specifications are subject to change without notice. | ||||