| DATE OF SPECIFICATION | Oct-07 | |||
| ENGINE | ||||
| Manufacturer | John Deere | |||
| Model | 4024T | |||
| Gross Horsepower (kw) | 49 (37) | |||
| Net Horsepower (kw) | 45 (34) | |||
| Rated RPM | 2400 | |||
| Grosspeak Torque, lb-ft (nm) | 139 (188) | |||
| #Cylinders | 4 | |||
| Displacement, cuin(L) | 149 (2.4) | |||
| Engine aspiration | Turbocharged | |||
| Fuel Capacity, gal (L) | 18 (66) | |||
| HYDRAULIC SYSTEM | ||||
| Standard Pump Flow, gpm (L/min.) | 15 (57) | |||
| Optional High Flow, gpm (L/min.) | Not applicable | |||
| System Pressure, PSI (KPA) | 3450 (23770) | |||
| Auxiliary Hydraulic Circuit, Std; Opt | Std | |||
| Hydraulic power, calculated, hp (kw) | 30.2 (22.5) | |||
| Opt High-Flw Hyd pwr,calculated,hp(kw) | Not applicable | |||
| PERFORMANCE | ||||
| SAE Rated Oper Cap (ROC), lb (kg) | 1,260 (572) | |||
| SAE ROC with opt Counterweight, lb (kg) | 1,400 (635) | |||
| Tipping Load, standard, lb (kg) | 2,525 (1145) | |||
| Boom, lb(kn) | 2,800 (12.4) | |||
| Bucket, lb(kn) | 3,300 (14.6) | |||
| Heaped Bucket Capacity, cu ft (cum) | Not published | |||
| Reference Bucket Width, in (mm) | 60" (1520) | |||
| Self leveling bucket, Opt | Opt | |||
| DRIVE TRAIN | ||||
| Maximum Grnd Speed,stand,mph (kph) | 6.8 (10.9) | |||
| Two Speed Trans Grnd Speed,mph(kph) | Not applicable | |||
| Drive chain size | 80HZ | |||
| Axle torque, lb-ft (nm) | 3,420 (4637) | |||
| Standard Tire Size | 10x16.5 | |||
| DIMENSIONS | ||||
| Length with Bucket, in (mm) | 124" (3150) | |||
| Length Without Bucket,in (mm) | 96" (2440) | |||
| Width Without Bucket, in (mm) | 59" (1500) | |||
| Height to ROPS, in (mm) | 77" (1960) | |||
| Height to Hinge Pin, in (mm) | 109" (109) | |||
| Dump Height, in (mm) | 84" (2130) | |||
| Dump Reach, in (mm) | 17.4" (440) | |||
| Dump Angle, degrees | 40º | |||
| Bucket Rollback @ ground, degrees | 30º | |||
| Wheelbase, in (mm) | 38" (970) | |||
| Ground Clearance, in (mm) | 7.6" (193) | |||
| Angle of Departure, degrees | 26º | |||
| OPERATING WEIGHT, STANDARD LB (kg) | 5,150 (2336) | |||
| Specifications are based on published information at the time of publication. Specifications are subject to change without notice. | ||||