Engine
Manufacturer Yanmar 3TNV84T
Engine HP (kW) - gross 37.1 (27.3) per ISO 97/68/EC
PTO HP (kW) - Gear transmission ---
PTO HP (kW) - Hydrostatic transmission 30.0 (22.4) per SAE
Rated engine speed, rpm 2500
Type Diesel
Operating range 950 (2800)
Aspiration Turbo
Cylinders/Displacement, cu. in. (liters) 3 / 91.5 (1.5)
Cylinder Liners Cast-in-block
Bore and Stroke, mm (in.) 84x90 (3.3x3.54)
Compression Ratio 19:1
Lubrication Pressurized
Cooling System Water pump
Air Cleaner Dry-type with safety element
Engine Shutoff Key switch
Engine Torque @ rated speed, ft./lb. (N/m) 62.7 (85.0)
Fuel Tank Cap., US Gal. (L) (Open; Cab) 6.4 (24.2)
Electrical
Type 12 volt
Battery Size (CCA) 500
Alternator (12 volt, amp) 40 amp
Starter Size, hp (kW) 1.4 (1.0)
Fuel System
Type Direct injection
Injection Pump Type In-line with electric shutoff
U.S. gal./hr (L/hr) @ 100% load* ---
*Fuel consumption rate should be used for comparison purposes only. ---
Transmission
Std. Transmission; Forward/Reverse Hydro, 2-Range
Opt. Transmission; Forward/Reverse ---
Left-Hand Reverser No
On-The-Go Shifting (Yes/No/Partial) No
Direction Reverser; Forward/Reverse Yes; Twin Touch pedals
Final Drive Spur gear
Brakes Wet disk
Steering Power steering
Clutch; Wet/Dry ---
Clutch Disk Diameter, in. (mm) wet clutch ---
Drawbar Tongue Weight Capacity, lb. (kg) Optional - 882 (400)
Axle Capacity (in operation) ---
Front, lb. (kg) 1760 (800)
Rear, lb. (kg) 2640 (1200)
Creeper No
Hydraulics
Type Open Center
Pump Rated Output, gpm (L/min.) 9.3 (35.2)
Steering 4.0 (15.0)
Implement 5.3 (20.2)
Pump Type Dual gear
Maximum Operating Pressure (PSI) 2500
Draft Control Type Position control
Remote Control Valves Available 2 (supplied with loader)
3-Point Hitch
Type Category 1
Lift Capacity (24-in. behind link arms), lb. (kg) 1356 (615)
Lift Capacity @ lift link ends, lb. (kg) ---
Power Take-Off (PTO)
Standard Rear @ 540
Optional ---
Control Independent
Clutch Multi-disk, wet
Brake (for Mid and Rear PTO) Multi-disk, wet
Fluid Capacities
Fuel Tank, gal. (l) 6.4 (24.2)
Cooling system (includes coolant bottle), qt. (l) 4.4 (4.2)
Crankcase with filter, qt. (l) 4.8 (4.5)
Transmission and Hydraulic System, gal. (l) gear ---
Transmission and Hydraulic System, gal. (l) hydrostatic 5.5 (21.0)
Front Axle Gearcase (MFWD axle), gal. (l) 0.85 (3.2)
Final Drive
Type Spur Gear
Engage On-the-Go Rear Differential Lock Yes
Operator Station
Rollover Protective Structure ASAE S478
Rigid - Foldable - Telescopic Rigid
Platform - Flat/Straddle Semi-flat
Gear Shift Location - Console/Floor Left Side
Cab
Compliance ---
Visibility ---
Air Conditioning, Temperature Differential ---
Doors ---
Platform - Flat/Straddle ---
dB(A) Rating ---
Seat Suspension System ---
2WD Dimensions
Wheelbase, in. (mm) ---
Front Tread Range, in. (mm) ---
Rear Tread Range, in. (mm) ---
Minimum Rear Tread Setting, in. (mm) ---
Front Axle Clearance, in. (mm) ---
Turning Radius w/Brakes, ft. (m) ---
Turning Radius w/o Brakes, ft. (m) ---
Unballasted Operating Weight, lb. (kg) ---
Approx. Ship Wgt, lb. (kg) Open; Cab ---
MFWD Dimensions
Wheelbase, in. (mm) 60 (1525)
Front Tread Range, in. (mm) 41.7 (1058) - 50.3 (1278)
Front Axle Clearance, in. (mm) 13.0 (330)
Turning Radius w/Brakes, ft. (m) ---
Turning Radius w/o Brakes, ft. (m) 9.2 (2.8)
Limited Slip Differential ---
Unballasted Operating Weight, lb. (kg) ---
Approx. Ship Wgt, lb. (kg) Open; Cab 2087 (947)
Standard Tires
2WD ---
Front ---
Rear ---
MFWD ---
Front 7.00-14 4PR (R1) Agricultural
Rear 11.2-24 4PR (R1) Agricultural
Miscellaneous
Underhood Muffler Yes
Joystick SCV Control No; Optional with loader
Inboard Planetary ---
Axle Type MFWD (bevel gear type)
Brakes - Type and Control Wet disk