Engine
Manufacturer Yanmar 3TNV82A
Engine HP (kW) - gross 26.4 (19.4) per ISO 97/68/EC
PTO HP (kW) - Gear transmission ---
PTO HP (kW) - Hydrostatic transmission 20.5 (15.3) per SAE
Rated engine speed, rpm 2600
Type Direct injection
Operating range 1000-2750
Aspiration Natural
Cylinders/Displacement, cu. in. (liters) 3 / 81.2 (1.33)
Cylinder Liners Cast-in-block
Bore and Stroke, mm (in.) 82x84 (3.23x3.31)
Compression Ratio 19.2:1
Lubrication Pressurized
Cooling System Water pump
Air Cleaner Dry-type, two stage
Engine Shutoff Key switch
Engine Torque @ rated speed, ft./lb. (N/m) 51.3 (69.6)
Fuel Tank Cap., US Gal. (L) (Open; Cab) 7.1 (27); NA
Electrical
Type 12 volt
Battery Size (CCA) 500
Alternator (12 volt, amp) 40
Starter Size, hp (kW) 1.6 (1.2)
Fuel System
Type Diesel
Injection Pump Type Gear
U.S. gal./hr (L/hr) @ 100% load* 1.6 (6.2)
*Fuel consumption rate should be used for comparison purposes only. ---
Transmission
Std. Transmission; Forward/Reverse Hydro - 2 Range
Opt. Transmission; Forward/Reverse ---
Left-Hand Reverser NA
On-The-Go Shifting (Yes/No/Partial) NA
Direction Reverser; Forward/Reverse Twin Touch pedals
Final Drive Spur gear
Brakes Wet disk
Steering Power steering
Clutch; Wet/Dry NA
Clutch Disk Diameter, in. (mm) wet clutch ---
Drawbar Tongue Weight Capacity, lb. (kg) 562 (255)
Axle Capacity (in operation) ---
Front, lb. (kg) 1940 (880)
Rear, lb. (kg) 2426 (1100)
Creeper NA
Hydraulics
Type Open Center
Pump Rated Output, gpm (L/min.) 10.5 (39.6)
Steering 5.5 (20.8)
Implement 5.0 (18.8)
Pump Type Gear
Maximum Operating Pressure (PSI) 2418
Draft Control Type Position Control
Remote Control Valves Available 2
3-Point Hitch
Type Category I
Lift Capacity (24-in. behind link arms), lb. (kg) 1250 (567)
Lift Capacity @ lift link ends, lb. (kg) 1433 (650)
Power Take-Off (PTO)
Standard Standard Rear @ 540 RPM and Mid @ 2100 RPM std.
Optional ---
Control Independent
Clutch Wet disk
Brake (for Mid and Rear PTO) Wet disk
Fluid Capacities
Fuel Tank, gal. (l) 7.1 (27)
Cooling system (includes coolant bottle), qt. (l) 4.1 (3.9)
Crankcase with filter, qt. (l) 3.0 (2.8)
Transmission and Hydraulic System, gal. (l) gear ---
Transmission and Hydraulic System, gal. (l) hydrostatic 3.9 (14.6)
Front Axle Gearcase (MFWD axle), gal. (l) 3.6 (3.4)
Final Drive
Type Spur Gear
Engage On-the-Go Rear Differential Lock Yes
Operator Station
Rollover Protective Structure OSHA, SAE, ASAE
Rigid - Foldable - Telescopic Foldable
Platform - Flat/Straddle Flat
Gear Shift Location - Console/Floor Left-Hand-Side
Cab
Compliance ---
Visibility ---
Air Conditioning, Temperature Differential ---
Doors ---
Platform - Flat/Straddle ---
dB(A) Rating ---
Seat Suspension System ---
2WD Dimensions
Wheelbase, in. (mm) ---
Front Tread Range, in. (mm) ---
Rear Tread Range, in. (mm) ---
Minimum Rear Tread Setting, in. (mm) ---
Front Axle Clearance, in. (mm) ---
Turning Radius w/Brakes, ft. (m) ---
Turning Radius w/o Brakes, ft. (m) ---
Unballasted Operating Weight, lb. (kg) ---
Approx. Ship Wgt, lb. (kg) Open; Cab ---
MFWD Dimensions
Wheelbase, in. (mm) 65.2 (1655)
Front Tread Range, in. (mm) 32.7 (830)
Front Axle Clearance, in. (mm) 12.5 (318.4)
Turning Radius w/Brakes, ft. (m) 7.5 (2.3)
Turning Radius w/o Brakes, ft. (m) 8.2 (2.5)
Limited Slip Differential ---
Unballasted Operating Weight, lb. (kg) ---
Approx. Ship Wgt, lb. (kg) Open; Cab 1865 (846)
Standard Tires
2WD ---
Front ---
Rear ---
MFWD ---
Front 23x8.5-12 R4
Rear 36x14.00-17.5 R4
Miscellaneous
Underhood Muffler Yes
Joystick SCV Control Yes
Inboard Planetary No
Axle Type Flanged
Brakes - Type and Control Wet Disk