Tractor Unit
Engine ---
Type Diesel, Direct Injection
Manufacturer/Model Yanmar/TNV88
Gross Eng. HP (kW) @ Rated Speed 43.0 (32.1) per ISO 97/68/EC
Net Eng. HP (kW) @ Rated Speed 41.0 (30.6) per SAE
PTO Output HP (kW) @ Engine Speed 33.0 (24.6) per SAE
Hydraulic HP (kW) 30.9 (23.1)
Cylinders 4 Cylinders
Total Displacement, cu. in. (l) 133.6 (2.2)
Fuel consumption, 75% load, gal./hr. 2.0 (7.5)
Restart Auto-bleed
Cold Start Assist Glow plugs
Rated Speed, rpm 2600
Electrical ---
Volts/Alternator 12V/55 amp standard
Battery CCA 770
Alternator Amperes 55 standard
Starter Size, HP (kW) 2.7 (2.0)
Hydraulics ---
Type Open Center
Number of Pumps 3
Total Flow, gpm (l/m) 23.6 (89.2)
System Pressure, psi (kPa) 3000 (20,684)
Hydraulic Flow to Loader, gpm (l/m) 12.2 (46.1)
Hydraulic Flow to Backhoe, gpm (l/m) 16.3 (61.5)
Oil Cooler Steel, Thick Core, 190 sq. in. (123,024 sq. mm)
Capacities ---
Fuel Tank, gal. (l) 15.3 (58)
Crankcase with Filter, gal. (l) 1.25 (4.9)
Cooling System, gal. (l) 2.5 (9.3)
Transmission and Hydraulic System, gal. (l) 15.0 (57)
Transmission Case and Filter, gal. (l) 9.7 (37)
Transmission and Hydraulic Oil HyGard J20C or HyGard J20D Cold Service
Front Axle Gearcase (MFWD axle), gal. (l) 1.3 (4.9)
Drivetrain ---
Transmission Type ---
Transmission Controller ---
Transmission Ranges/Speeds ---
Clutch; Wet/Dry ---
Creeper ---
Creeper Location ---
Range Speeds ---
Maximum Traveling Speed, mph (k/h) ---
Steering ---
Type Hydrostatic Power
Turn Angle 58 Degrees
Turns Lock-to-Lock ---
Powertrain ---
Front Axle ---
MFWD Engagement ---
Front Axle Oscillation ---
Front Differential ---
Final Drives ---
Brakes ---
Type Wet Disk, Inboard
Actuation Mechanical
Parking Brake Automotive Style Lever
Turning Brakes Individual
Rear Power Take Off ---
Type Fully Independent
Speed, rpm 540 @ 2,600 Engine RPM
PTO Engagement Solenoid Operated Clutch
PTO Clutch Wet, Multi-Disk
PTO Brake Wet, Multi-Disk
Tires ---
Front 10x16.5, 8 PR
Rear 17.5Lx24, 8 PR
Tread Pattern Industrial (R4) Standard; Turf (R3) Optional
Rear Hitch ---
3-Point Hitch Category I Standard; Field Installed Optional
Control Type Position only
Lift Capacity @ link ends, lb. (kg) ---
Lift Capacity @ 24-in. behind lift point, lb. (kg) 2500 (1134)
Drawbar Hitch Field Installed Optional
Operator Station ---
Steering Non-Tilt
Direction Control Dual Foot Pedal
Instrumentation Right Side Console
Seat Conversion Roll Over
Canopy Curved Polyethelyne
Rollover Protective Structure 4-Post, SAE J1040 to 9000 lb.
Falling Object Protective Structure Canopy Sheet, ISO 3449 Level 1
Standard Lighting 2 55 Watt Canopy Mounted
Warning Lights Canopy Mounted
Stop/Brake Lights Rear, Canopy Mounted
Transmission Presence Safety System Yes
PTO Presence Safety System Yes
Backhoe Presence System Yes
Loader Unit
Model John Deere
Design ---
Type Closed Box Construction Style Lift Arms
SCV Control Single Lever Tractor Mount
Boom Control Valve System Series Type
Masts Ductile Cast Iron, Z-Form Webbing
Boom Bushings Replaceable
Pin Service End-Of-Pin Greasing
Bucket Anti-Roll-Back Device Mechanical
Auxiliary Front Hydraulics Optional Factory Installed
Bucket Quik-Coupler Standard
Bucket Mounting Plates Skid Steer Loader
Bucket Mounting Plate Area, sq. in. (m2) 270 (174,193)
Standard Bucket Width, in. (mm) 72 (1829)
Anti-Rollback Devise Mechanical
Dimensions ---
Lift Height to Pivot Pin, in. (mm) 114.8 (2917)
Reach at Max. Lift Height, in. (mm) ---
Max. Dump and Rollback Angle ---
Performance ---
Lift Cap. to Max Height/Pivot Pins, lb.(kg) 2727 (1237)
Lift Cap. to Max. Height, lb. (kg) 2042 (926)
Breakout Force @ Pivot Pins, lb./ft. (N) ---
Backhoe Unit
Model John Deere
Design ---
Construction Boxed Construction from High Strength, Low Alloy Steel, Robotically Welded
Backhoe Controls Two Lever, Direct Linkage
Boom Type Curved, Fully Closed
Swing Frame Cast Iron
Boom and Crowd Cylinder Mounting In-Line, Pinned
Swing Cylinder Mounting Cast in Trunions, Cast-Iron Mounting
Cylinder Rod Plating Nickel Chrome
Cylinder Rod Harness HRC58
Cylinder Rod End Attachment Friction Welded
Stabilizer Feet Cast Iron, Reversible
Aux. Hyd. Opt. (7th Function Valve) Factory Installed
Bucket Linkage John Deere Power Link with Guide Link
Swing Lock Mechanism Lift Pin
Boom Lock Mechanism Lever Actuated Hook, Rubber Cushioned
Stabilizer Angle Rearward 18 Degree
Bucket Couplers Available Std. Pin on/Opt. Mech. Coupler
Bucket Sizes Available, in. 12, 16, 18, 20, 24, 30, 36
Dimensions ---
Max. Digging Depth, in. (mm) 121 (3073)
Digging Depth/2-ft. Flat Bot., in. (mm) ---
Truck Loading Height, in. (mm) 101 (2567)
Reach from Swing Pivot, in. (mm) 158.1 (4016)
Boom Swing Arc 180 Degree
Bucket Rotation Arc 190 Degree
Stabilizer Spread-Oper., in. (mm) 98 (2489)
Leveling Angle 13
Performance ---
Digging Force-Crowd, lb. (kN) 3764 (16.743)
Digging Force-Bucket, lb. (kN) 5723 (25.457)
Side Swing Force, lb./ft. (kN/m) 7,975 (10.8)
Boom Lift Capacity at Ground Level, lb. (kg) 1216 (552)
Dipperstick Lift Capacity at 8-ft. above ground, lb. (kg) 1499 (680)
Overall Dimensions
Tractor Wheelbase, in. (mm) 71.5 (1815)
Transport Height-Backhoe Folded, in. (mm) ---
Transport Length-Backhoe Folded, in. (mm) ---
Transport Width-Incl. Front Bucket, in. (mm) ---
Curb Turning Radius w/o Brakes, in. (mm) 144 (3568)
Curb Turning Radius w/Brakes, in. (mm) 124 (3150)
Bucket Clearance Circle w/o Brakes, in. (mm) ---
Bucket Clearance Circle w/Brakes, in. (mm) ---
Operating Weight w/Backhoe, lb. (kg) ---
Operating Weight w/Loader and Box Blade, lb. (kg) 7280 (3302)