AMS REMINDER
Controller not yet available_ _ _ _ message on the GS2 or GS3
Customer may get a “Controller not yet available” message that shows up on one of the home pages of his GS2 or GS3 displays. This means the display had a home page setup to view the application of a controller that it was hooked up too. An example would be if he was planting, spraying, or applying anhydrous and when you move the display to a different machine or implement you will get this message. The fix for this issue is to have the customer select a new home page from the “Layout Manager” for the application he is running.
Here are the measurements for 60/70 series combines.
Machine
A – 0
B – 70 inches
C – 86 inches
D – 155 inches
Corn Head
A – 0
B – 4.5 ft.
C – 0
D – 2.5 ft.
Platform
A – 0
B – 3.5 ft.
C – 0
D – 2ft
GS2 should be stored near room temperature during the off season and in the original shipping container with no items contacting the touch screen surface.
You may want to clean the screen before you put it away so it will be ready to go for the next season.
TO CLEAN THE SCREEN:
Make sure the GS2 is POWERED DOWN!
Wipe the screen with a soft cloth sprayed with a non - ammonia based cleaner such as John Deere glass cleaner
Make sure you have a screen protector on your GS2 touch screen to help prevent scratches and smudges from dirt or grease on your fingers
Contact us at A&M GREEN POWER if you have any questions.
Check out this youtube link.
http://www.youtube.com/watch?v=jVE4n7v9FFI